Page 1 of 1

Try connect D-LINK DCS-931L

Posted: Tue Jul 03, 2018 11:34 am
by denismol
I want to connect to D-LINK DCS-931L.

MJPEG http://192.168.0.29/video/mjpg.cgi
JPEG http://192.168.0.29/Image.jpg
This url work in the browser, but in RVCamera1 donn't.

What params I need set to RVCamera1 to connect? (camera login: admin password: 12345)

Re: Try connect D-LINK DCS-931L

Posted: Wed Jul 04, 2018 8:22 pm
by Sergey Tkachenko
Did you assign these values to UserName and UserPassword properties of TRVCamera?

Re: Try connect D-LINK DCS-931L

Posted: Thu Jul 05, 2018 6:23 am
by denismol
Yes, of course.

Once I was able to connect, but the picture was updated only every 10 seconds. After that, it was no longer possible to connect with the same settings. In this case, the browser has no problems with the display on the url: http://192.168.0.29/video/mjpg.cgi

Re: Try connect D-LINK DCS-931L

Posted: Thu Jul 05, 2018 3:17 pm
by Sergey Tkachenko
Unfortunately, this is a local IP address, so we cannot test it ourselves.

Which version of RVMedia do you use? Do you have FFmpeg available for this application?