Installation of TRichView - Windows 8 - RvDBPkgDXE4.dprog

General TRichView support forum. Please post your questions here
Post Reply
Joe Robbins
Posts: 2
Joined: Wed Oct 30, 2013 6:27 pm

Installation of TRichView - Windows 8 - RvDBPkgDXE4.dprog

Post by Joe Robbins »

I am new to TRichView. I just tried to install into Delphi XE4 on a Windows 8 machine. Installation of RVPkgDXE4.dproj was no problem.

When I try to install RVDBPkgDXE4.dproj, I receive the following error message:

[dcc32 Fatal Error] RVPkgDXE4.dpk(1): E2225 Never-build package 'RVPkgDXE4' must be recompiled
[dcc32 Fatal Error] RVDBPkgDXE4.dpk(38): E2202 Required package 'RVPkgDXE4' not found

Any ideas? Thanks.
Sergey Tkachenko
Site Admin
Posts: 17253
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko »

1) Check if RVPkgDXE4.dcp is created in <COMMON DOCUMENTS>RAD Studio\11.0\Dcp\ after the compilation of RVPkgDXE4.dpk

2) Menu Tools | Options, Environment Options | Delphi Options | Library, selected platform="32-bit Windows", Library path. Make sure that "<COMMON DOCUMENTS>RAD Studio\11.0\Dcp" is included.
Joe Robbins
Posts: 2
Joined: Wed Oct 30, 2013 6:27 pm

Problem Solved

Post by Joe Robbins »

Thanks, adding the path as suggested allowed this to be installed.

Regards,

Joe Robbins
Post Reply