Try connect D-LINK DCS-931L

New product: VCL components for displaying and controlling IP cameras, webcams, video conferencing, video chats
Post Reply
denismol
Posts: 3
Joined: Tue Jul 03, 2018 11:29 am

Try connect D-LINK DCS-931L

Post by denismol » Tue Jul 03, 2018 11:34 am

I want to connect to D-LINK DCS-931L.

MJPEG http://192.168.0.29/video/mjpg.cgi
JPEG http://192.168.0.29/Image.jpg
This url work in the browser, but in RVCamera1 donn't.

What params I need set to RVCamera1 to connect? (camera login: admin password: 12345)

Sergey Tkachenko
Site Admin
Posts: 14170
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: Try connect D-LINK DCS-931L

Post by Sergey Tkachenko » Wed Jul 04, 2018 8:22 pm

Did you assign these values to UserName and UserPassword properties of TRVCamera?

denismol
Posts: 3
Joined: Tue Jul 03, 2018 11:29 am

Re: Try connect D-LINK DCS-931L

Post by denismol » Thu Jul 05, 2018 6:23 am

Yes, of course.

Once I was able to connect, but the picture was updated only every 10 seconds. After that, it was no longer possible to connect with the same settings. In this case, the browser has no problems with the display on the url: http://192.168.0.29/video/mjpg.cgi

Sergey Tkachenko
Site Admin
Posts: 14170
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: Try connect D-LINK DCS-931L

Post by Sergey Tkachenko » Thu Jul 05, 2018 3:17 pm

Unfortunately, this is a local IP address, so we cannot test it ourselves.

Which version of RVMedia do you use? Do you have FFmpeg available for this application?

Post Reply