Re: Constructure URL

Author

Message

Sergey Tkachenko

Posted: 08/08/2002 19:30:45

Use

tNo = RVData->GetItemTag(itemNo);

inside rveURLNeeded

> Hi Sergey,

> Thank you for your support. Here is the codes. Right now i can construct

> the URL within the table because our application not necessary open the

url

> from the rve. But,

> if i use the method "rve->SetItemTagEd(itemNo, tag)" it will construct the

> empty link.

> if i use "rve->SetCurrentTag(tag)" it will produces the same URL address

> if more than one link made.Is that the memory address refer to the same

place?

> Any ideas?

> void __fastcall TfrmDesigner::rveURLNeeded(TCustomRichView *Sender, int

id,

> AnsiString &url)

> {

> // randomize();

> int itemNo;

> int tNo;

> AnsiString mURL;

> TCustomRVFormattedData *RVData;

> rve->GetJumpPointLocation(id, RVData, itemNo);

> tNo = rve->GetCurrentTag();

> // tNo = rve->GetItemTag(itemNo);

> mURL = AnsiString ((char*) tNo);

> if(IsHTTP(mURL))

> url = mURL;

> else

> url = "http://" + mURL;

> }

> /----------------------------------------------------------------

> void __fastcall TfrmDesigner::winMakLinkExecute(TObject *Sender)

> {

> AnsiString url = InputBox("URL", "URL", "URL");

> if(url.AnsiCompareIC("url") == 0)

> return;

> if(!IsAddress(url)){

> ShowMessage("Invalid URL address.");

> return;

> }

> int itemNo = rve->CurItemNo;

> TCustomRVItemInfo *RVItem;

> RVItem = rve->GetCurrentItem();

> rve->ApplyTextStyle(4);

> int tag = (int) StrNew(url.c_str());

> rve->SetItemTagEd(itemNo, tag);

> }

> //---------------------------------------------------------------

> Thanks again...

> Cheers

> "Sergey Tkachenko" <[email protected]> wrote:

> >> By the way, the method i used current is

> >> rve->GetJumpPointLocation(id, RVData, itemNo);

> >>

> >

> >Please post a complete code which you execute in OnJump.

> >