Compiled Demo/font appearance

ScaleRichView support and discussion (TRichView add-on for WYSIWYG editing)
Sergey Tkachenko
Site Admin
Posts: 14766
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko » Wed Nov 07, 2007 6:59 am

May be I still do not understand the source of the problem.
To my opinion, document in zoom = 100% and zoom = 101% must look almost identically. If it is displayed wrong, the whole drawing procedure must be changed, not only displaying in 100%.
(Moreover, as far as I know how ScaleRichView works, document is formatted in higher resolution, and any displaying on the screen is scaling; just like TRVPrintPreview that displays document formatted in the printer resolution (usually higher than the screen resolution))

Mafi
Posts: 9
Joined: Mon Feb 18, 2008 10:15 am

ScaleRichview font scaling/drawing

Post by Mafi » Mon Feb 25, 2008 5:55 pm

Any good news for the font display for TScaleRichview. Seems that this depends on the monitor resolution and varies from perfect up to completely unreadable :(

btw: The output of TRichview looks much much better.


Thanks
Mafi

Sergey Tkachenko
Site Admin
Posts: 14766
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko » Tue Feb 26, 2008 8:15 am

Unfortunately I cannot reproduce this problem. In my computer, the output looks good both in normal (1600x1200) and narrow (1600x900) resolutions.
This problem will be fixed when we found a system were we will be able to reproduce it.

Mafi
Posts: 9
Joined: Mon Feb 18, 2008 10:15 am

Post by Mafi » Tue Feb 26, 2008 8:39 am

It's quite easy to reproduce. Install VMWare 6.xx, create a small application with a TScaleRichview component, aligned to client and one button to load a *.rvf file. Compile this app and run it inside VMWare (VMWare option set: View-autofit guest), change the size of the VMWare window for each run and you can see the problem. Did the same yesterday.

Thanks and greets

Sergey Tkachenko
Site Admin
Posts: 14766
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko » Tue Feb 26, 2008 9:22 am

So does this problem exist only when running in VMWare?

Mafi
Posts: 9
Joined: Mon Feb 18, 2008 10:15 am

Post by Mafi » Tue Feb 26, 2008 12:03 pm

Definitely not, this problem is always existent, but you're able to use VMWare to simulate the behaviour of the problem, because you can change the resolution of the underlying OS (Windows?) very easily

Sergey Tkachenko
Site Admin
Posts: 14766
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko » Wed Jun 11, 2008 7:13 pm

The problem with widescreen displays is fixed.

Mafi
Posts: 9
Joined: Mon Feb 18, 2008 10:15 am

Post by Mafi » Mon Jun 16, 2008 7:07 am

Hi,


please can you update also the TRichview component, because I'm unable to compile the packages?

Error: sclrview.pas line 5714 and line 8351, undefined identifier "ondrawhyperlink"


Thanks.

Sergey Tkachenko
Site Admin
Posts: 14766
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Post by Sergey Tkachenko » Mon Jun 16, 2008 10:53 am

TRichView is already updated, make sure that you use version 10.2.
If you already installed this version, then delete files of the older TRichView version, because it looks like Delphi tries to compile ScaleRichView with the older version of TRichView.

Besides, it looks like your version of ScaleRichView is not the latest because in the latest version of SclRView.pas, this TRichView.RVData's event is accessed on lines: 5799, 8490, 8492

toolwiz
Posts: 150
Joined: Wed Nov 30, 2005 3:27 am

Post by toolwiz » Mon Jun 16, 2008 6:29 pm

Wow! This looks a LOT BETTER!!!

GREAT JOB!


-David

Post Reply