Example of DeviceType = rvdtUserData usage

RVMedia support and discussion (components for displaying and controlling IP cameras, webcams, video conferencing, video chats, recording audio and video files)
Post Reply
panlab_mf
Posts: 30
Joined: Wed Feb 06, 2019 9:55 am

Example of DeviceType = rvdtUserData usage

Post by panlab_mf » Fri Sep 27, 2019 9:23 am

Hi all,

I need an example of usage of the DeviceType = rvdtUserData, so for instance,
  • compose a PIP from two network cameras,
  • or a side-by-side from two cameras,
  • or add a text overlay on the original image from a single camera.
Any help will be very appreciate.

Thanks in advance

Sergey Tkachenko
Site Admin
Posts: 14730
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: Example of DeviceType = rvdtUserData usage

Post by Sergey Tkachenko » Fri Sep 27, 2019 6:59 pm

The example of this mode is in ClientServer\VideoChats\Lecture\Lecturer. It is used to display slides.

As for drawing additional information on video frames, you can also use TRVCamera.OnGetImage (but be careful, this event is called in a thread context).
For drawing addition information on displaying, you can use TRVCamView.OnPaint (see the demos Cameras\Filter, MotionDetect and MotionDetect_Old)

panlab_mf
Posts: 30
Joined: Wed Feb 06, 2019 9:55 am

Re: Example of DeviceType = rvdtUserData usage

Post by panlab_mf » Mon Sep 30, 2019 6:36 am

Thanks for the information. This sounds great.

I'm going to develop a small prototype based on the example programs you suggested.

Regards,

Post Reply