After updating to TRichView v21.1

General TRichView support forum. Please post your questions here
Post Reply
candsoft
Posts: 6
Joined: Mon Feb 13, 2023 12:48 am

After updating to TRichView v21.1

Post by candsoft »

Hello :D

After updating to TRichView v21.1

CompileError occurs in RVMathitem.pas ( Not enough actual parameters )

Can you check it?

Thanks!!
standay
Posts: 256
Joined: Fri Jun 18, 2021 3:07 pm

Re: After updating to TRichView v21.1

Post by standay »

Candsoft, I had some misc compile errors too with initial install of 21.1. I think I closed Delphi and restarted and everything seemed to settle down. Not sure what the errors were now but things are OK. Using Delphi 10.3. Just FYI. Stan
Sergey Tkachenko
Site Admin
Posts: 17253
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: After updating to TRichView v21.1

Post by Sergey Tkachenko »

I confirm that RVMathItem.pas was not updated in the Setup.
I'll upload a fixed version later today.
As a quick fix, you can add False as the last parameter on the lines that generate the error.
standay
Posts: 256
Joined: Fri Jun 18, 2021 3:07 pm

Re: After updating to TRichView v21.1

Post by standay »

Thanks Sergey

Stan
candsoft
Posts: 6
Joined: Mon Feb 13, 2023 12:48 am

Re: After updating to TRichView v21.1

Post by candsoft »

It is compiled by following your advice

Thanks :D
Sergey Tkachenko
Site Admin
Posts: 17253
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: After updating to TRichView v21.1

Post by Sergey Tkachenko »

A fixed setup has been uploaded.
(but if you already made the changes, you do not need to reinstall)
Post Reply